Description
- Self-contained device, no computer required.
- Works with CompactFlash Cards, types I/II, CF1.0 to CF6.0.
- Transfers data at up to 3.9 GB/min per port, with no slowdown over thousands of ports.
- Copies all file formats bit-by-bit, including proprietary and unknown formats.
- Sanitizes data using Quick Erase, Full Erase, or DoD Erase.
- Supports cards up to 2TB in size.
- Works with CFast devices through an optional adapter.
U-Reach 1 to 3 CF Duplicator and Sanitiser - Silver Series - CF904S
Intelligent Copy Option
Quick Copy Mode
Copies only the data area, skipping empty spaces, to speed up the process.
Supports Windows (FAT16/32/64/NTFS), Linux (ext2/ext3/ext4), and Mac (HFS/HFS+/HFSX) file systems.
If the file system format is not supported, the duplicator will automatically switch to Whole Media Copy mode.
Whole Media
Copies the entire media bit by bit, with no format limitations.
Exceptional speed
U-Reach CF duplicator can copy up to 3.9GB/min on all devices, simultaneously and without any speed degradation as the number of targets increases.
User-Friendly Design
Modular Sockets
Interfaced sockets are subjected to wear-and-tear caused by frequent connections and disconnects. Modular sockets enable quick replacements while reducing downtime, effectively making this solution a long-term and cost-effective ownership.
Ergonomic & Compact Proportions
The refined ergonomic proportion reduces the flash duplicator by 50% to 70% compared to traditional chassis design.
Quality Testing/Checking Functions
U-Reach flash memory duplicator/sanitizer has built-in functions to inspect flash devices. It helps the user to identity and remove poor quality CF cards.
H3 Read Only Test
Determines if the flash is readable. This test will not modify pre-existing data.
Capacity Check
Verifies the initial sector and the final sector of the connected flash device within 2 seconds.
H5 Write/Read Test
Overwrites machine-generated values to all sectors in the NAND flash and verifies them to determine quality. Once the test passes, the devices are then formatted into FAT.
Read/Write Speed Check
This function performs a read/write benchmark of the connected devices within 8 seconds.
H6 Quality Test
Resembling the H5 test, it overwrites machine generated-values only to the empty sectors without disturbing pre-existing data, partitions, and formats.
Flash Speed And Capacity Filtration
Sets limit on lowest reading and writing speed and picks up Flash devices that are below the setting speed.
Sets "target tolerance". Picks up Flash devices that have exceeded the tolerance range.
Real-Time Monitoring
Monitor real-time status via PC through USB cable link.
|